Tray Cable vs Teck Cable | Product Knockout

Tray Cable vs Teck C able | Product KnockoutOur Product Knock-out series is a match-up between two similar products. In boxing terms, think same weight class, same caliber, and same level of experience and amount of exposure. The purpose of these posts are for you to see a side-by-side view of two similar products, and to be able to understand which one will be crowned champ for your specific purposes. Take your seats and prepare for battle, because the gloves are coming out.

Tray cable and teck cable are power cables both used for direct burial purposes. Although teck cable is rated to Canadian standards, (CSA) both teck and tray cables have many overlapping similarities. Let’s begin by taking a closer look at each of these cables!

What is Tray Cable?

Tray cables are multi-conductor and multi-paired cables generally used in signal and energy transmission with minimum interference, as well as for installation in trays, wireways, troughs, ducts, conduits, and channels. There are several different types of tray cable, including Type TC Tray Cable, Power Limited Tray Cable (Type PLTC), Instrument Tray Cable (Type ITC), Wind Turbine Tray Cable (Type WTTC), and Exposed Run Tray Cable (TC-ER). Depending on your specific application’s needs, one tray cable rating may work better than another.

What is Teck Cable?

Teck cable, known as TECK90 Cable, is CSA approved cable rated 600 to 5kV. Teck cable is found in single and multiple conductor constructions with an inner jacket, aluminum or steel interlocked armor, with a PVC jacket overall. Often dual rated NEC type MC cable, TECK90 is designed for use in hazardous applications (HL Rated), often mining; petroleum; chemical; and pulp and paper industries.

Tray Cable Teck Cable
Conductor Bare Copper or Tinned Copper depending on rating

Available in multi-conductor, multi-pair or multi-triad configurations

Bare Copper or Aluminum;

Available in single conductor, multi-conductor and composite configurations

Insulation Many options available including PVC/Nylon, XLPE and EPR Most commonly XLPE and EPR but others may be available
Shielding Optional, can be overall, individually, or both; Most commonly unshielded, but optional in form of tape shield or
Jacket Many options available including PVC, CPE Most commonly PVC
Armor Only when rated Type MC AIA ALUMINUM INTERLOCKED ARMOUR or GSIA Galvanized Steel Interlocked Armor
Temperature rating Depends on materials used; typically 90°C -40°C to 90°C
Voltage 150V for ITC, 300V for PLTC and 600V for TC; WTTC can be rated up to 1000V 600V, 1000V, 5kV, even up to 28kV  as HVTECK
Approving agency UL / NEC (can be CSA dual rated) CSA (can be dual rated to UL Type MC)

Tray Cable vs Teck Cable

There is a lot of overlap between teck cable and tray cable when it comes to their construction. Both are capable of featuring bare copper conductors, XLPE and EPR insulation, and PVC jackets. However, there are a few significant differences that set these cables apart as well. All teck cable features a bare copper ground wire in the construction which provides a conducting path from the wire to its end point. Teck cable is also always armored. Although there are certain tray cables with grounds and armor, not all types of tray cables offer these features, like teck cable does.

Tray Cable vs Teck Cable

Tray Cable vs Teck Cable

Winner by unanimous vote? Instead, it seems as if the match has ended in a technical decision. In this case it looks like our crowned champ depends on your specific application use.

If you’re unsure about what cable you’ll need in order to meet the needs of your application, consult with a qualified engineer or with one of Allied’s knowledgeable sales reps. Visit the main product pages here to learn more about tray cable vs teck cable.

About awcwire
Allied Wire & Cable is a value-added manufacturer and distributor of electrical wire and cable, tubing, and more. We are a family owned and operated company, serving a wide range of industries, including the military, automotive, aerospace, and telecommunications markets. Allied is headquartered in Collegeville, PA. Additional locations can be found across the US, in Merrimack, NH, Tampa, FL, Pewaukee, WI, and Las Vegas, NV. For more information on Allied, visit our main website at www.awcwire.com.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: