Allied Encyclopedia: The Cat7 Cable Debate

Allied EncyclopediaDoes Cat7 cable actually exist?

It’s a valid question and the answer is almost as widely debated as the existence of the Loch Ness Monster. But when it comes to Category 7 cable, it’s not so much a question of existence as a matter of legitimacy and viability.


There is a type of telecommunication cabling known as Cat7 cable, but “Cat7” is formally known as Class F cable, as outlined by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Developed in 2002, international standard ISO/IEC 11801 defines Class F cable at frequencies up to 600 MHz.

In addition to Cat7, customers are also known to call out Cat7a cables. Cat7a is the unofficial name used to refer to cables under the ISO Class FA standard, with frequencies up to 1000 MHz. Class Fa cable appears, along with Class Ea cable, in the first amendment to ISO/IEC 11801:2002, approved in 2007.

And no…

On the other hand, Cat6a is the most recent standard developed by the TIA for enhanced performance standards for twisted pair cable systems. The TIA does not recognize Class F Cable. They never developed specifications for Cat7 cables and they don’t plan to. They’re skipping ahead to Cat8 cable. But before we get to that, let’s establish the characteristics of this alleged Cat7.

Category 7 Cable Characteristics

  • 1000BASE-T (Gigabit Ethernet) and 10G BASE-T (10-Gigabit Ethernet) signal supported
  • Up to 600 MHz (1000 MHz for the Cat-7a) frequencies supported
  • Up to 10,000 Mbit/s (40 Gbit/s for the Cat-7a) speeds supported
  • Can be used up to a maximum of 100 meters
  • Constructed with fully shielded twisted pairs –Screen Shielded Twisted Pair (SSTP) or Screened Foiled Twisted Pair (SFTP)
  • Can be terminated with 8P8C compatible GG45 connector or with TERA connectors

Do we use Cat7 or wait for Cat8?

Whether you are designing the telecommunications infrastructure for a new building or looking to upgrade your existing system, you will naturally want to assess both your current and future needs. What cabling are you presently using? Is its performance still satisfactory? If so, do you think it will be satisfactory well into the future? How long are you going to be in this building? These are the types of questions it would be good to mull over before making any cabling decisions.

Pros to Cat 7/Cat7a (Class F Cable)

  • It supports much higher transmission rates and frequencies than its predecessors, allowing them to carry more information faster.
  • Fully shielded twisted pairs under an overall shielding cut down on crosstalk and electromagnetic interference (EMI) significantly.
  • Cat7 cable has an estimated 15-year lifecycle. Earlier generations have 10-year life cycles.
  • Though Cat7 utilizes different connectors from prior generations, it is still compatible with 8P8C RJ45 connectors when terminated with a GG45 connector rather than the TERA. Class F Cable can be backward compatible with Class D (using Cat5e elements) and Class E cable (using Cat6 elements).

Cons to Cat7/Cat7a

  • Category 7/Class F Cable is not recognized by the TIA.
  • Cat7 didn’t catch on very well with most manufacturers; most hardware produced supports 8P8C rather than the GG45 or TERA for 10 Gigabit Ethernet products in order to function on Cat6a.
  • According to early reports on Category 8 standards, backwards compatibility with Cat7 is not guaranteed. Cat8 will likely, however, be backwards compatible with all previous generations standardized by the TIA.

What We Know So Far About Cat8 Cable

  • It will be outlined under the TIA-568-C.2 Balanced Twisted-Pair Telecommunications and Components standard
  • The standard is currently being developed by the TIA’s TR-42.7 Subcommittee on copper cabling systems
  • Potential publish date of late 2014- 2015
  • Expected to be specified to 2GHz
  • Will likely use 8P8C RJ45 connectors
  • Will likely have shielded pairs
  • Expected to be usable up to 30 meters
  • Similar conductor size and overall diameter to previous generations (based on Cat6A and Cat7 cable development, the general consensus is that the largest practical gauge for copper twisted pair cables is 22AWG)

The Final Decision

Some companies have found that their data demands require an upgrade to Cat7. Many, however, have found that Cat7 provides far more bandwidth than they require and have opted for Cat5e, Cat6 or Cat6a. If you are looking to buy Category 7 cable to “future-proof” your facilities, you might want to wait and see what Category 8 looks like. Not only will it meet TIA established standards, it is more likely to be both backwards compatible and more easily upgraded.

If you’d like help weighing whether Cat7 or another category cable is a good fit for your application, or could use a hand choosing a cabling solution in general, contact one of the knowledgeable representatives at Allied Wire and Cable at or 800-472-4655.

About awcwire
Allied Wire & Cable is a value-added manufacturer and distributor of electrical wire and cable, tubing, and more. We are a family owned and operated company, serving a wide range of industries, including the military, automotive, aerospace, and telecommunications markets. Allied is headquartered in Collegeville, PA. Additional locations can be found across the US, in Phoenix, AZ; Bedford, NH; Pewaukee, WI; Rochester, NY, Tampa, FL; and Mt. Juliet, TN. For more information on Allied, visit our main website at

One Response to Allied Encyclopedia: The Cat7 Cable Debate

  1. Steve says:

    Thanks for the info. I thought I read CAT 8 would probably be published much sooner than you indicated. For many if not all, how long the wait is the number one factor. It would be great if you continue to update this page as you get more info on the publish date.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: